arm-none-eabi-gcc -vĬOLLECT_LTO_WRAPPER= /opt /toolchains /gcc-linaro-arm-none-eabi- 4.8- 2014.04_linux /bin /.
#Building u boot install#
libexec /gcc /aarch64-none-elf /4.8.3 /lto-wrapperĬonfigured with: /cbuild /slaves /oorts /crosstool-ng /builds /aarch64-none-elf-linux /.build /src /gcc-linaro- 4.8- 2013.11 /configure -build=i686-build_pc-linux-gnu -host=i686-build_pc-linux-gnu -target=aarch64-none-elf -prefix= /cbuild /slaves /oorts /crosstool-ng /builds /aarch64-none-elf-linux / install -with-local-prefix= /cbuild /slaves /oorts /crosstool-ng /builds /aarch64-none-elf-linux /install /aarch64-none-elf -without-headers -with-newlib -enable-threads=no -disable-shared -with-pkgversion= 'crosstool-NG linaro-1.13.1-4.8-2013.11 - Linaro GCC 2013.10' -with-bugurl=https: // /gcc-linaro -with-arch=armv8-a -disable-_cxa_atexit -with-gmp= /cbuild /slaves /oorts /crosstool-ng /builds /aarch64-none-elf-linux /.build /aarch64-none-elf /build /static -with-mpfr= /cbuild /slaves /oorts /crosstool-ng /builds /aarch64-none-elf-linux /.build /aarch64-none-elf /build /static -with-mpc= /cbuild /slaves /oorts /crosstool-ng /builds /aarch64-none-elf-linux /.build /aarch64-none-elf /build /static -with-isl= /cbuild /slaves /oorts /crosstool-ng /builds /aarch64-none-elf-linux /.build /aarch64-none-elf /build /static -with-cloog= /cbuild /slaves /oorts /crosstool-ng /builds /aarch64-none-elf-linux /.build /aarch64-none-elf /build /static -with-libelf= /cbuild /slaves /oorts /crosstool-ng /builds /aarch64-none-elf-linux /.build /aarch64-none-elf /build /static -enable-lto -enable-linker-build-id -disable-libmudflap -disable-libgomp -disable-libssp -disable-libstdcxx-pch -enable-multiarch -disable-multilib -enable-languages=c, c++,fortran If you can find gcc version 4.8.3 20140904 (prerelease) at the end of the line, the toolchain is well installed.ĬOLLECT_LTO_WRAPPER= /opt /toolchains /gcc-linaro-aarch64-none-elf- 4.8- 2013.11_linux /bin /. You can check if the toolchain installed above works properly while checking the version of toolchain. To apply this change, login again or evaluate $HOME/.bashrc with source command. You can apply the change if you login again or import In order to add the toolchain path to PATH, paste below lines to $HOME/.bashrc.Įxport PATH= /opt /toolchains /gcc-linaro-aarch64-none-elf- 4.8- 2013.11_linux /bin: /opt /toolchains /gcc-linaro-arm-none-eabi- 4.8- 2014.04_linux /bin: $PATH
$ sudo tar xvf gcc-linaro-arm-none-eabi- 4.8- 2014.04_ -C /opt /toolchains / $ sudo tar xvf gcc-linaro-aarch64-none-elf- 4.8- 2013.11_ -C /opt /toolchains /
#Building u boot download#
Once the download is done, extract the tarball to /opt/toolchains/.
0 kommentar(er)
